Fitting a Cat Flap

The process of installing a cat flap may seem intimidating but it's simple with the proper instructions. Decide how high you'd like the flap to be (normally, it is at the belly height). Mark this point on your door and then use the template provided to guide you when drilling.
If you have a kitten who is still a baby then gently prop the door slightly open and allow it to go through. Reward the kitten as it goes through.
Measure the Door
A cat flap is an excellent method to let your pet leave and come in and out of your home whenever it wants. This will keep your cat in good health as it will ensure it gets enough exercise and will also allow it to go back inside if it is stranded outside during bad weather. This will cut down on the time you spend letting your cat out or in, and keep your home secure by notifying you when it's gone.
However, it is essential that the cat flap is correctly fitted to prevent your pet from being able to escape through it or be pushed through by any other animals (e.g. dogs). You should determine the height of your pet's stomach and the size of the doorway in your home to ensure that the flap is at the correct height. You can alter the height of your flap in case your cat is taller or less than average.
The next step is to use a spirit level to mark the center of the door. This is where you'll install the flap. Using the marking as a guide, take an jigsaw to cut the shape of the flap in the door. Once you have cut out the door, sand the edges of the door to smooth the surfaces. Then drill any fixing holes that are required.
Fitting a cat flap should not take more than two hours. The process is a bit more complicated if you are required to install it in a uPVC door or a composite one. This is because these doors are available in various thicknesses, which can affect the way that holes are cut. This is the reason we recommend hiring a professional to complete the task, especially if you have never worked with glass before.
Measure Your Cat
A cat flap will save you from listening to your pet meow to let it in or out. This is particularly helpful when your cat is inside during the winter months while you are at work.
If you want to fit a cat flap inside your door, it is essential that you determine the size of your cat prior to beginning the task. cat flap double glazing might seem like a straightforward task, but it's important to make sure you measure the right measurements. If not, your cat might find it difficult to use.
Firstly, make sure your cat is relaxed and not anxious prior to taking the measurements. You will have to hold your cat in a place where they cannot move. Also, ensure that the measuring tape is flat and not curved against the body. Holding the measuring tape or ruler against their body from the top of their head to the bottom of their tail can allow you to determine an exact measurement.
Once you've figured out the measurements of your cat, it is time to take a look at the door and decide on where you want to place the flap. The flap should be placed at the level of your cat's belly. This will allow them to go through the door without much effort. This will also stop the flap from making a lot of noise when it swings back and back.
You should take into consideration the thickness of the uPVC or composite door as well. While all timber doors have the same thickness, uPVC or composite doors can differ greatly in their overall design. This makes fitting a flap for your cat more difficult as you must ensure that the hole is of the correct size.
You can make use of the template included in the instructions to mark the position of the hole in the door. This will allow you determine where the opening needs to be, and also to make sure the template is properly placed on the door. Using a spirit-level to make sure that the template is sitting in a straight line against the door can be extremely helpful.
Cut the Flap
You'll need to make a hole in the door to accommodate your cat flap prior to you can attach it. This can be a challenging task and it is recommended to seek out the assistance of a professional cat flap fitter for this job if you don't have the knowledge or skills to tackle it yourself. It is also recommended to read the instructions included with the kit to learn how to do this properly.
To do this, you will need to measure the height of your cat's or kitten's belly and use this as an indication point. A good guideline is to set the cat flap about 10-15 centimeters from the ground as this is roughly the average height of the cat's belly. This will allow your cat to move through the flap easily and make it difficult for other cats or naughty neighbours to enter or exit.
Draw the location of the cat flap on the door using pencil. If your kit includes an outline of paper, place this over the door and use the markings to drill holes into each corner of the template. You will then be able to cut the shape of the template and replace it with your cat flap.
If you are installing your cat flap on an entryway made of wood or uPVC, you can do it yourself if are confident enough to use the jigsaw. Be sure not to cut through the vertical rails or mullions of your door. click the next document can use a jigsaw to cut your panel into a square or a circle, depending on how you'd like it. Make sure to take your time and don't try to make the jigsaw cut faster.
After the hole has been cut, carefully place the cat flap in its new place of residence. Make sure it is firmly secured. If the flap has screw caps then push them into the protruding bolts. After the screws are installed, sand the rough edges and apply sealant to any gaps. This will prevent drafts from entering your home.
Install the Flap
If you have a basic cat flap, you can open it and encourage your pet to walk through by placing a small amount of cat food in front of the door. Alternatively you can try pushing the cat through using your hands or with a stick. Once your pet has become comfortable walking through the flap, it will be able to come and go as it pleases. This lets you let it in and out whenever it wants.
It is possible to put an animal flap into the UPVC doors or glass door, but it might not be as easy as installing one in a wooden external door. This is because the doors made of UPVC and some kinds of glass doors don't have a uniform thickness. This could have an enormous impact on how you cut out the flap hole and also how well the flap fits after installation.
Based on the type of cat flap you choose It may come with its own mounting kit as well as a template that shows you exactly where to drill holes for it. If the kit does not include a template you can create one on your own. When cutting, it's important to keep the jigsaw from being pushed too hard so that you don't create a larger hole than is necessary in your door.
Some cat flaps come in circular designs, which are more difficult to put in. If you have a circular flap, it's essential to make sure the hole is in the proper position on your door, because in the event that it's not, the cat won't be able to use it and could be stranded in the open all day (or even night).
Certain cat flaps come with locks that allow you to determine when your cat can enter and leave. These are useful for pets who are afraid of going out in the dark or coming back inside at night. They can also be helpful for those who work all day. The lock can be used to allow entry or exit, and some are locked in either direction permitting you to close the door completely, which is particularly beneficial for older or ill cats who don't want to go out in bad weather.