Fitting a Cat Flap

It may seem difficult to install a cat flap but with the right instructions it's not that hard. First, determine the height you want the flap to be (on average, belly height). Note this on the door and use the template provided as a reference to drill.
If you have a kitten that is still a baby then gently prop the door slightly open and encourage it to pass through. Reward it when it goes through.
Take a measurement of the door
A cat flap is a great way to let your pet move inside and out of your home as it likes. This can help keep your cat in good health by ensuring that it is exercising as well as being able to go back inside if stuck outside in the rainy weather, especially in winter. It also can reduce the amount of time you'll have to let it out or in and will also help keep your home safe by letting you know when it's been out.
However, it is important that the cat flap is fitted correctly to prevent your pet from escaping through it or be pushed through by any other animals (e.g. dogs). You should measure the height of your pet's belly and the size of the doorway in your home to make sure the flap is at the right height. You can adjust the position of your flap when your cat is taller or less than the average.
The next step is to utilize a spirit level mark the center of the door, where you will install the flap. Then, using the mark as a guideline, cut out the contour of the flap with the help of a jigsaw. Once you've cut the space, sand down the edges of the door to create smooth surfaces. You can then drill any fixing holes required.
The process of installing a cat flap is not as complicated as you think, and it shouldn't take more than two hours to complete the entire task from start to completion. The process is a bit more complicated if you are required to put it in the case of a uPVC door or composite one. This is due to the fact that these doors come in different thicknesses, which could affect the way holes are cut. We recommend that you call a professional if this is your first time working with glass.
Measure Your Cat
You can avoid hours of listening to the pet's meow to be allowed in or out. This is particularly helpful if your cat is trapped inside during the winter months while you are at work.
If you want to fit a cat flap in your door, it is essential to determine the size of your cat prior to beginning the task. It may seem like a simple task, but it's crucial to measure your cat correctly. Otherwise, your pet might find it difficult to use.
First, ensure that your cat is calm and not feeling stressed before you take the measurements. You will have to hold your cat in a place in which they cannot move. Also, ensure that the measuring tape is flat and not curved against their body. By keeping the measuring tape or ruler against their body from the top of their head to the tip of their tail can allow you to make an accurate measurement.
Once you've figured out the measurements of your cat, it is time to look at the door and decide on where to put the flap. The best option is to position the flap in the middle of your cat's stomach as it will allow them to get through it without too much effort. This will also prevent the flap from making too much noise when it swings back and forth.
You must take into consideration the thickness of the uPVC or composite door, as well. While all doors made of timber have a similar thickness, uPVC or composite doors are different in their overall structure. This could make the process of the process of putting in an enclosure for your cat more difficult since you have to make sure that the hole is the proper size.
It is also worth reading through the directions that come with the cat flap kit to find an illustration template that can be used to determine the location of the hole inside the door. This will help you determine where the hole must be placed and ensure that the template is placed correctly on the door. Utilizing a spirit level to make sure that the template is flush against the door can be very helpful.
Cut the Flap
Before you can put in your cat flap you have to cut the door panel in order to make it large enough to accommodate it. This can be a daunting job and it is recommended that you get a professional help you if you lack the knowledge or skills. You can also read the instructions included with the kit to learn how to do it correctly.
To do this you need to take a measurement of the height of your cat's or kitten's belly and use this as a reference point. As a rule of thumb put the flap around 10-15 centimeters higher than the ground. This is the average height of the stomach for cats. This will let your cat pass through the flap easily and will make it difficult for other cats or naughty neighbours to enter or exit.
Once you've determined the location where the cat flap needs to be located, mark the position on the door with the help of a pencil. If your kit has a template, place it over the door. Utilize the markings on the template to drill holes at every corner. Then, RepairMyWindowsAndDoors 'll be able cut out the template shape and replace it with the flap for cats.
If you are installing your cat flap on an entryway made of wood or uPVC, you can do this yourself if you are confident enough to use a jigsaw. Make sure you don't cut through any of the door's mullions, or vertical rails. You can use a jigsaw cut the panel into a square or circle, depending on the design of your cat flap. Remember to take your time and don't make the jigsaw cut faster.
Once the hole is made, carefully fit the flap onto its new home and make sure that it's securely fixed. If the flap has screw caps put them on the protruding bolts. After the screws are installed smooth the edges and seal any gaps. This will stop draughts from entering your home.
Place the Flap
If you have a simple cat flap, you can open it and encourage your pet to go through by putting a little bit of cat food on the outside of the door. You can also try pushing the cat through using your hands or with a stick. Once your pet is used to moving through the flap, it should be able to go in and out as it wants so you can let it out and in without keeping the door open for it all day (and potentially in any weather).
It is possible to install the flap inside the UPVC doors or glass door, however it may not be as easy as installing one on a wooden external door. This is because UPVC doors and some types of glass doors don't have a uniform thickness. This can have a major impact on the way you cut out the flap hole and also how well the flap fits after installation.
Based on the type of cat flap you choose It could be equipped with a mounting kit and template that will tell exactly where to drill the holes for it. If the kit does not come with a template, you can make one by yourself. It's important to not push the jigsaw too in order to cut, so it doesn't make a larger than needed hole in your door.
Certain cat flaps come in circular designs, which are more difficult to put in. If you have a round flap, make sure that the hole is in the correct place on your door. If not, your cat might not be able use it, and may be stuck outside the whole day (or night).
Some cat flaps have locks that allow you to regulate the time your cat comes and goes. They are helpful when your cat is scared of leaving in the dark or coming back inside at night. They can also be helpful if you work all day. The lock can be used to allow entry or exit, and some locks can be locked in either direction allowing you to shut the door completely, which is particularly beneficial for older or ill cats who aren't willing to go out in rainy weather.