Fitting a Cat Flap

It can be difficult to put up the flap for your cat but with the right instructions it's not that hard. Decide how high you'd like your cat flap to be (normally it's at the belly height). Note this on your door and then use the template provided as a guide when drilling.
If you have a kitten who is still a newborn, gently prop the door slightly open and encourage it to pass through. Reward it when it goes through.
Measure the Door
A cat flap is an excellent option to let your pet leave and come inside and out of your home whenever it wants. This can keep your cat healthy since it will ensure it is getting enough exercise and will also allow it to return inside if it gets trapped in the elements during bad weather. This can reduce the time you spend letting your cat go in and out and also make your home safe by notifying you when it's gone.
It is crucial to ensure that the cat flap is placed correctly in order to prevent your pet from being pushed through through it by other animals (e.g. dogs). You should determine the height of your pet's stomach and the size of the doorway in your home to make sure the flap is at the proper height. If your cat is taller or shorter than average, you can alter the flap's height by moving it up or down a small amount.
Then, use a spirit-level to mark the middle of the door. their website is where you will put in the flap. With upvc door panels with cat flap as a guideline, you can use the jigsaw and cut the shape of the flap within the door. Once you have cut out the door, sand the edges of the door to smooth the surfaces. Then drill any fixing holes required.
The process of fitting a cat flap is not as difficult as you may believe and it shouldn't take more than two hours to finish the entire task from start to the end. However, the process could be a little more complicated in the event that you have to put it into a uPVC or composite door since these doors come with an array of thicknesses, which affect how the holes are cut and what they are fixed into. We recommend that you call an expert when this is your first experience with glass.
Measure Your Cat
You can save yourself hours of listening to the cat's meows to be let in or out. This is especially useful for cats that are in the house during all seasons while you are at work.
If you are planning to install a cat flap on your door, it is essential to determine the size of your cat prior to beginning the task. Although it might seem like to be a simple task, it is essential to get the measurement right or your cat may be unable to use.
First of all, make sure that your cat is relaxed and not stressed before you take the measurements. You will need to hold them in a position where they cannot move and ensure that the measuring tape or ruler is flat against their body, not arching in any places. By keeping the measuring tape or ruler against their body from the top of their head to the tip of their tail can allow you to make an accurate measurement.
Once you have your cat's measurements then you can examine the door to decide the best place to place the flap. It is advisable to place the flap at the height of your cat's stomach as it will allow them to pass through it with minimal effort. This will also stop the flap from making a lot of noise when it swings back and back.
You should also think about the thickness and the structure of the uPVC door or composite. Although timber doors are of the same thickness, uPVC and composite doors can be very different in their overall structure, which can make fitting a cat flap more complicated because you must make sure the hole you cut is the correct size for your pet.
It is also worth looking through the instructions that come with the kit to find an illustration template that can be used to mark the position of the hole in the door. This will help you determine where the hole needs to be located and ensure that the template is placed precisely on the door. It is also helpful to utilize a spirit-level to make sure that the template sits flush against the door.
Cut the Flap
You will need to cut an opening in the door panel for your cat flap before you can install it. This can be a tricky job, and it is recommended that you get help from an expert cat flap fitter for this step if you don't have the expertise or knowledge to complete the task yourself. You can also refer to the instructions provided in the kit to find out how to do it right.
You can consider the height of the cat's or kitten's stomach to guide you. In general you should place the flap approximately 10-15 centimeters above the ground. This is the average height of the belly for cats. This will let your cat pass through the flap without difficulty and make it difficult for other cats and nosy neighbours to enter or exit.
Once you've decided where the cat flap should be located, mark the position on the door with pencil. If your kit includes a paper template, lay it over the door and use the markings to drill holes in every corner of the template. You should then be able to cut the template's shape and replace it with your cat flap.
You can put in your cat flap yourself on a wood or uPVC door when you're confident with a Jigsaw. Be cautious not to cut into the vertical rails or mullions of your door. You can use a jigsaw to cut the panel into a square or a circle according to the design of your cat flap. Take your time, and don't make the jigsaw cut faster.
Once the hole is cut, carefully place your cat flap in its new home. Make sure it is securely secured. If it features caps for screws, then put these onto the protruding screws. Once the screws have been installed smooth the edges and apply sealant to any gaps. This will stop drafts from entering your home.
Fit the Flap
If you have a simple cat flap, you can leave it open and encourage your pet to walk through by placing a small amount of cat food in the front of the door. You can also try pushing the cat through using your hand or a stick. Once your cat is used to moving through the flap, it should be able to go into and out as it wishes and you should be able to let it in or out without having to be there keeping the door open for it throughout the day (and potentially in all weather conditions).
It is possible to fit a cat flap in the UPVC doors or glass door, but it might not be as simple as putting one in a wooden external door. upvc door panel cat flap is because the UPVC doors and certain types of glass doors don't have a uniform thickness. This can affect the way you cut the opening for the flap and can also affect whether your flap is fitted correctly after it has installed.
The mounting kit could include a template showing you the best places to drill holes. If the kit does not include the template you can copy it to create your own. It's important to not press the jigsaw too hard when cutting, so that it doesn't make a larger than necessary hole in your door.
Certain cat flaps come in circular designs, which are more difficult to put in. If you have a round flap, ensure that the hole is in the correct place on the door. In the event that it is not, the cat may not be able use it, and might be locked outside for the entire day (or at night).
Some cat flaps have locks that permit you to control the time your cat comes and goes. These are very helpful when you're concerned about your cat going out at night and coming back in the darkness, or if you're at work for the entire day. The lock can be turned on to allow or deny entry, and some are locked in both directions, which allows you to close the door completely. This is particularly beneficial for cats with a chronic illness or older age who don't want to go out in the rain.