Fitting a Cat Flap

It can be difficult to put up the flap for your cat however, with the proper instructions, it's not too difficult. Decide how high you'd like your cat flap to be (normally, it is at belly height). Note this on the door and use the template included as a guide to drill.
If you have a kitten who is still a newborn and you want to keep the door open, gently prop it slightly open and encourage it to go through. Reward it as it passes through.
Take a measurement of the door
A cat flap allows your pet to move into and out of your home at the time that is convenient for you. This will help keep your cat healthy by ensuring that it is exercising and also being able to get back in if it is trapped outside in bad weather, especially in winter. It can also reduce the amount of time you'll have to spend letting it in or out and will also help ensure your home is secure by letting you know when it's been out.
However, it is important that the flap for your cat is fitted correctly to prevent your pet from being able to escape through it or be pushed through by any other animals (e.g. dogs). It is essential to measure the height of your pet's belly and the doorway to your home to make sure that the flap is at the right height. You can adjust the height of your flap when your cat is smaller or taller than average.
Then, use a spirit-level to mark the center of the door. This is where you will put in the flap. Then, using the mark as a guideline, cut out the contour of your flap on the door with a Jigsaw. After cutting the area, sand down the edges to create smooth surfaces. Make any holes that are required.
Fitting a cat flap should not take longer than two hours. The process is a bit more difficult if you have to install it in a uPVC door or a composite one. This is due to the fact that these doors come in different thicknesses, which could affect the way the holes are cut. This is why we always recommend calling a professional to carry out the work, particularly when you've never dealt with glass before.
Measure Your Cat
You will not have to spend hours of listening to the pet meow to be let in or out. This is especially helpful for those who working all day and your cat has to stay in the house waiting for you to get home in any weather.
It is essential to measure your cat's measurements first before you begin the installation. Although it might appear to be to be a simple task, it is essential to get the measurement right or your cat may find it difficult to use.
Firstly, make sure your cat is calm and not feeling stressed prior to taking the measurements. You'll need to hold them in a position where they cannot move and make sure that the measuring tape or ruler is flat against their body and not bending in any place. You can get a precise measurement by keeping the measuring tape or ruler flat against the body of the animal from the top to the bottom.
Once you've figured out the measurements of your cat's body, it's time to take a look at the door and decide on where you want to place the flap. Place the flap at the level of your cat's belly. This will allow them to walk through the door with minimal effort. This will also prevent the flap making quite a lot of noise when it swings open and shut.
It is also important to consider the thickness and structure of the uPVC door or composite. Although timber doors are of the same thickness, uPVC and composite doors may differ in their overall design and can make fitting a cat flap more complicated as you will need to make sure the hole you cut is the right size for your pet.
You can also use the template drawing included in the instructions to mark the location of the hole on the door. This will allow you to see the location where the opening should be, and also to make sure the template is placed correctly on the door. It is also beneficial to employ a spirit-level to ensure that the template is placed in a straight line against the door.
Cut the Flap
Before you can install your cat flap, you'll must cut the door panel to make it large enough to accommodate it. try these guys 's a challenging task and it is recommended that you get a professional help you if you lack the skills or experience. You can also refer to the instructions that come in the kit to find out how to do it properly.
You can use the height of the cat's or kitten's stomach as a reference. As a general rule you should place the flap around 10-15 centimeters higher than the ground. This is the typical height of the cat's belly. This way your cat will be able to move through the flap without difficulty and will also make any other cats or curious neighbours difficult time trying to get in or out.
double glazing cat flap of the cat flap on the door using the pencil. Next, if your kit includes a paper template, lay this over the door and use the marks to drill holes into each corner of the template. After that, you'll be able to cut the template and replace it with the cat flap.
You can install the cat flap yourself inside the door made of wood or uPVC if you are confident with the Jigsaw. Ensure that you do not cut into any of the door mullions or vertical rails. You can use a jigsaw to cut your panel into a square or circle, depending on how you'd like to cut it. Make sure to take your time and don't try to make the jigsaw cut faster.
After the hole has been cut, carefully place your cat flap in its new home. Make sure that it is firmly secured. If it has screw caps, then push these onto the protruding screws. Once the screws are in place, you can sand any rough edges of the cut, and then apply sealant around any gaps to ensure there aren't any draughts getting into your home.
Place the Flap
If you have a basic cat flap you can leave it open and encourage your pet to go through by placing a small amount of cat food in front of the door. You can also push the cat with the help of a stick or your hands. Once your pet is used to walking through the flap, it will be able to move in and out as it wants, so you can let it out or in without keeping the door open to allow it in all day (and potentially in all weathers).
It is possible to fit the flap inside an UPVC door or glass door, however it's not as simple as installing one in a wooden external door. This is because the doors made of UPVC and some kinds of glass doors don't have a uniform thickness. This can have a dramatic effect on how you cut the hole for the flap and can also affect whether your flap fits correctly once it's installed.
The mounting kit might include a template showing you the best places to drill holes. If the kit doesn't come with a template you can copy it to create your own. It's important to not use the jigsaw to in order to cut, so it doesn't create a larger than necessary hole in your door.
Some cat flaps are available in circular shapes, which are more difficult to put in. If you have a circular flap, ensure that the hole is in the right place on your door. Otherwise, the cat might not be able to access it, and could be stuck outside the whole day (or night).
Certain cat flaps come with locks that let you control the time your cat can enter and leave. These are useful when your cat is scared of leaving in the dark or returning to the house at night. They are also useful for those who work all day. The lock can be engaged to allow or deny entry, and some can be locked in either direction permitting you to close the door completely. This is particularly beneficial for older or ill cats who aren't willing to go out in bad weather.