What Experts Say You Should Know

Autowatch Ghost Installation
The TASSA verified Ghost-II system is a new generation stealth immobiliser that prevents your vehicle from being taken by a sophisticated thief. It utilizes the buttons on your vehicle (on the steering or centre console) to generate a pin code that is difficult to crack.
It utilizes the vehicle's CAN Data Network to work quietly. There are no indicators with LEDs that can be altered and it does not emit radio frequencies, which means it is not detectable by thieves using diagnostic tools.
Installation Process
A Ghost immobiliser is a hidden device that is fitted in your vehicle, and it stops thieves from cloning or stealing your car. It is a great alternative to a steering wheel lock, and far more effective. It's easy to install and is transferable when you swap cars. It is also cheaper than a reverse camera and will prevent your vehicle from being stolen by hackers.
It is an innovative immobiliser that guards your vehicle against key cloning, hacking and even key theft. The system is completely invisible to thieves and can be activated only with a unique code. The system is completely unnoticeable to diagnostic tools because it doesn't emit radio signals.
The Autowatch Ghost is a basic device that can be installed on most vehicles within only a few hours. It is backed by a Tassa guarantee and accepted by insurance companies. It works with the CAN data circuit in your vehicle to shut down the engine, and it does not have any LED indicators. It is wired directly to your ECU which makes it extremely difficult for thieves to bypass.
The buttons on your car send data to the world and the Ghost immobiliser recognizes these buttons and allows you to create a PIN sequences of up to 20 inputs. Only you will be able to recognize this sequence, and it is impossible to break. This small device can protect your car from key hacking or cloning. It makes it almost impossible to take.
You can create your own pin codes by using an app on your phone. You can also create a "service mode". This lets you disable the system so that garages can service or repair your vehicle without having to enter a disarm code. This is a great option for when you need to take your vehicle to the garage for maintenance or repairs.
The system is a simple method to protect your vehicle and is compatible with the majority of modern automobiles. It's easy to remove and transfer it to a new vehicle, in the event that the new vehicle is compatible with the device.
TASSA Approved
Autowatch Ghost is a market-leading immobiliser that safeguards your vehicle against key cloning and theft. It prevents your vehicle from being started or driven until you enter a unique PIN sequence via the buttons in your vehicle. The buttons can be found on the steering wheel, door panels or on the indicators. The Keylab can be as long as 20 presses long. You can also change it at any time.
It is important to be aware that the Ghost immobiliser hasn't been approved by Thatcham but it is TASSA-approved. This is an independent body that is responsible for the certification of security and tracking devices. Moreover the system is regarded by several insurance companies as a reliable deterrent against theft.
In contrast to traditional Thatcham alarm systems This one, unlike traditional alarm systems, Ghost utilizes the CAN-bus information of your vehicle to work. This is accomplished by connecting the Ghost to your vehicle's OBD. It then alters your car's OBD port to believe that a valid key exists. This is because the system has been programmed to operate in this manner.
With the OBD port hacked the thieves are able to connect to laptops and hack the computer of your vehicle. The thieves can disable the immobiliser and deactivate the alarm in a matter of minutes. Additionally, they can locate your car on the map and take off without leaving a trace.
To prevent this, Ghost's immobiliser is able to intercept and respond to signals sent via the OBD port of the vehicle. It also can detect and disable a relay thieves could use to trick the vehicle into believing that the key was valid.
The Ghost is tiny, weatherproof device that is fitted into the wiring harness. It can only be detected by an experienced thief who uses diagnostic tools. It does not transmit any RF (radio frequency) signals that can be tapped or detected by sophisticated RF scanning and technology for code grabbing. Additionally it is not detected by scanners when it is in'service/valet mode'. If you are having your vehicle serviced, you are able to still utilize the device. It also helps to stop any theft attempts.
Insurance Approved
If you've been searching for an immobiliser to protect your car from thieves then the autowatch ghost is a great option. This unique immobiliser can protect your car from key cloning and hacking and can also stop your vehicle from being stolen in full. On its website you can find more about the autowatch Ghost. It also comes with a no-cost secure, safe iPhone application that you can use to manage the device.
The Autowatch Ghost is a device that connects to the CAN data circuit of your vehicle. This will prevent the engine from starting until you input the correct pincode. It is completely undetectable and won't interfere with radio signals. This makes it a great alternative to other security devices that use relay boxes or jammers to trick vehicles into thinking there's an active key.
The Ghost is one of most advanced safety systems for aftermarket use available. It's a Tassa certified immobiliser that is Insurance certified and provides excellent security against key copying. It's also the first aftermarket device to use the CAN-bus technology. On its website you can learn more about the Autowatch Ghost. It is constantly updated with new information.
Once it's installed the wiring of your vehicle will cover the ghost so that it is not visible to thieves. It communicates with your vehicle's ECU on the CAN data circuit, which makes it difficult to detect or block. It's also quiet, so thieves won't hear it running. It is able to enter service mode when the car is stationary. This means that thieves won't be able to start the vehicle or drive it until they know the correct pin code.
It also helps to prevent the theft of a vehicle by hacking the OBD port. This is a typical method used by thieves to bypass traditional security systems for vehicles. The OBD port is easily accessed and connected to computers. The thief can then access the vehicle's system, deactivate the alarm and create new keys. Ghost can stop this from happening and make it harder for thieves to steal the car.