How to Install a Cat Flap

Introduce your cat to the flap prior to installation so that they become familiar with the size and shape. The flap should be opened and let your cat explore it from every angle.
Ensure the cut-out is even and ensure that the cut-out is square and even. Mark the screw holes on your door and align them with the opening for the cat flap - the distance between the edges should be the same.
Preparation
Installing a cat flap in your home is beneficial for the health and wellbeing of your pet. It allows your pet to freely move from inside to the outside without you having allow them to enter or leave. My Home Page will also stop them from fighting over cat food, litter boxes or the door to the house.
The first thing you must do prior to beginning the installation of your cat flap is prepare the area where it will be placed. It will be much easier to work with if you eliminate any obstructions. Also, you should take out any furniture or decorations that might get in the way of your work.
You'll need to mark and measure the area where you'll be installing the cat flap. This will prevent you from making a mistake which could ruin your door or wall. You should put the cat flap in a location that is accessible for your cat, but doesn't compromise your home's structural integrity.
The cat flap can be put on the doorway leading to a space that is closed such as your laundry room or closet. This will prevent your cat from jumping over it, and also keep your cats away from dangers. It is also important to ensure that the flap for cats is low enough to be used by your smaller cat, as larger cats may struggle to leap through a higher-height flap.
If you have an open patio door that slides or an old-fashioned sash window, it might be a good idea to hire an experienced handyman to do the job. It can be a challenge to install a cat flap on these windows and doors, and mistakes can cause costly damage. A professional will be able to install the cat flap safely and without harming the structural strength of the door or window.
To determine the space for the cat flap, you will need to use a ruler or a tape measure to determine your cat's belly height from the floor. This will allow you to accurately cut out the opening for the cat flap. Once you've marked the line with a spirit-level, use it to ensure it is completely horizontal. Review the instructions that came along with the cat flap kit to find the template drawing. Attach the template to your door, so that the bottom edge coincides with the horizontal lines you've drawn. The template should be placed in the middle of your door.
Measurement
A cat flap, also referred to as a dog door is a small opening at the bottom of exterior doors or windows. It allows pets to leave and enter the home. They come in a variety of sizes and materials so that you can pick the ideal one for your home and pet.
It's important that you measure your windows or doors before you buy the new cat flap. This way you can ensure that the hole is going to be of the correct size and that the cat flap will fit. You can use this technique to determine the size of the opening by securing off a portion and walking through it with your pet.
It is also recommended to take the height of your cat from the floor to the lowest part on their belly. This will ensure that the flap is set at a height that your cat is comfortable with. If it's too low they may struggle to get through and if it's high, they might not be able to use the flap at all.
In general, you should strive to drill your holes at an angle of 45 degrees to the vertical surface. This will ensure the most secure and stable installation of your cat flap. If the cat flap kit you purchased didn't include a spirit-level, a straight edge can be used in place.
When fitting the cat flap to a glass or UPVC door or window it is recommended to hire an expert glazier to do this for you. These doors are usually toughened, and drilling can cause damage to their structure and cause them to shatter. This could create a security threat for your home.
Placing a cat flap in brick walls can be problematic, too, because if you drill into a soft section of the wall this can cause problems with pipes and cables that run through the property. This could lead to costly repairs or even leaks or weather damage from the outside.
Marking
Once you've measured your cat kitten to determine the appropriate size flap then you need to mark the location where the hole should go. Mark the center of the flap using a spirit level. If the template for the cat flap doesn't include a centre line, photocopy it and draw around it using pencil to mark the area where the hole will need to be cut.
If the cat flap is too low, your cat will be unable to get in and out, and when you set it too high, your cat may not be able to observe what's going on outside. It is best to try to make it as close to your cat's belly as you can to give them the greatest comfort and security.
It is important to keep a cat flap from being too close to a wall frame. This can cause problems with damp and draughts. If you're not familiar working with masonry, it might be worthwhile to seek out professional assistance.
Then you need to prop the door open and show your cat or kitten where to go. (It helps if a person is nearby to encourage them). Once they've made their way through the door and are comfortable, you can slowly begin to allow them to enter and exit at will.
It's important that you don't force your cat or kitten through the flap too quickly as this could lead to them becoming scared. The clunk and snap squeak of the door closing can cause injuries to your cat or kitten. They will be even more scared if their tail is caught in the flap. Cats also tend to return home to check on any intruders so having the door open could pose a risk because it could result in your pet being attacked by a cat they are familiar with. Installing a cat door that is small is best for your cat or kitten if it knows how to use it.
Installation
Once the cat flap is in place, it is important to show your cat how to use it. It will take a while however, with patience and a few treats to provide encouragement, your cat will eventually be able to use it. It is also possible to install a lock on the flap for extra security, particularly during harsh weather conditions or when out of the house.
The first thing you need to determine the location you'd like to put the cat flap inside your door. It will need to be placed in a place that opens into an area of protection in your garden. This will allow your cat to feel more secure when they exit and enter the home and will also stop other animals from entering your home.
You should also consider the height of the cat flap. This should be in line to your cat's measurement of stomach to ensure that they are able to move through. You can also set steps on either side of the entrance to help your cat get through.
Once you've decided where you'd like to place the cat flap then you can measure the door with an eraser and mark the spot. This will help you determine the best place to cut. You will then need to cut a square into the door using an Jigsaw. It is advised to wear safety goggles and a dust protection mask while working on this, as inhaling the dust could be hazardous to your health. Once the square is cut, it is necessary to sand the edges of the door to smooth the edges.
Once you've finished sanding, now replace the cat flap inside your door. The cat flap should be placed so that the lock, if it has one, is on the side of your door. Make the screw holes, should there be any on the door. Then, carefully insert the cat flap in the hole. Make sure that it fits snugly.