17 Reasons Why You Shouldnt Ignore Repairs To Upvc Windows

Repairs to uPVC Windows
uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. They don't decay or rust as timber and aluminum.
It is essential to clean and oil UPVC windows and doors regularly. This will reduce unnecessary repair costs and also increase energy efficiency.
1. Broken Glass
If the glass in your window is broken it could cause a large amount of damage to your home, making it extremely dangerous and possibly fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good repair.
For single pane windows, it is relatively easy to replace them, and the replacement is usually able to fit into the old frame very easily. If you have double-paned windows which are joined by internal beading, it is difficult to remove and replace the old panes. In this case, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.
If you're planning attempt to remove the glass panes yourself it is crucial to wear appropriate safety gear, including thick gloves and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall on the fabric and not onto the floor, where they could be trampled under.
Once the glass is removed from the window, it's best to seal the gap with packaging tape or duct tape to stop water and drafts from getting into the home until a professional is able to come out and fix the window. This also serves as a barrier to prevent any intruders from getting into your home. If the distance between the window and the door is large, you might want to use an alarm system that has windows. This will provide the best of both.
2. Sagging
Upvc is a long-lasting and energy efficient alternative to timber sash windows. However, with time, they are susceptible to a range of issues, including sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from getting worse.
Repositioning the hinges can aid in fixing a window that is sliding. To do this, you'll need open the window so that you can get to the frame. With the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in place.
If you can't reposition the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loose their elasticity. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.
uPVC handles can also loosen up. Most often, this is caused by screws that have come loose over time. However, it could occur because the handle mechanism has been worn out. Luckily, it's not difficult to fix the loose uPVC window handle yourself. First, you'll need to shut the window and perform an experiment fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't, you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into the position it was in.
3. Water Leaks
If you're waking up to damp floors and mouldy walls each time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or not present.
This is a relatively easy fix that can be completed by any competent DIYer. Depending on the severity of the issue is, old caulking may need to be removed. visit my home page is crucial to remember that when it is about uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area more difficult to clean and could reduce your energy efficiency.
It is important to check that the drainage holes are free of debris and that the sill pan has been angled correctly so that it drains away from the window. In more severe cases, you may need to replace the window.
Mold spots and rotted sills are other signs of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the house.
If the leakage occurs between the double-glazed glass it is more likely that the issue is with the seal than the frame. This can be easily corrected by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or are loose and open with ease, it may be the hinges that are at fault. These are easily repaired by any skilled DIYer and can usually be completed in a matter of minutes.
Like any mechanical part hinges will wear out over time. It is an easy process but it can be easier if you have someone to assist in holding the frame in place.
Check that the uPVC hinges open and close in the proper direction. Look for the arrows on each hinge to determine which direction the window should be opened.
Window hinges that aren't working properly can be caused by incorrectly opening the window in a particular manner or because of improper installation in the factory. Sending us a photo via our website will often solve the issue. We are happy to offer assistance.
It is also important to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant to the hinges is an ideal way to do this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It can also stop corrosion and reduce the risk of sticking. It is recommended to do this once a year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.
5. Draughts
Draughts in windows made of upvc can be caused by a few different factors. The hinges can also be misaligned due to wear, which can cause gaps between the frame and sash. If they are beyond repair, it may be required to realign them. Secondly the interlock, this is located on the hinge of the window, may also become misaligned, again it's possible to give them a clean but in some cases it might be necessary to get them replaced.
These seals can wear down or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures and will lessen draughts.
Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be placed over your window sill. They can help stop cold air from entering and keep your home warm and cosy!
Your windows made of upvc will remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is crucial to recognize that all windows have a lifespan and eventually, they will reach a point where it is more economical to replace them than repair them. If you are experiencing issues with your Upvc windows, it's recommended to seek assistance from a professional as soon as you can.