10 Things We Hate About Repairs To Upvc Windows

Repairs to uPVC Windows
uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. They do not rot or rust like timber and aluminum.
It is important to clean and oil UPVC doors and windows on a regular basis. This will reduce unnecessary repair costs and improve energy efficiency.
1. Broken Glass
The broken glass in your windows could cause significant damage to your home and even be fatal. It is essential to take the time to ensure that you are doing everything you can to keep your windows in good repair.
For single pane windows it is fairly easy to replace them, and the new window is usually able to fit into the old frame very easily. However, if windows with double panes are secured by internal beading, it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this situation you'll need locate some plastic spacers to aid the new pane in being able to fit properly into the window frame.
Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric and not onto the floor and could be trampled.
It's a good idea to seal the gap after the glass is removed. This will keep water and drafts from entering your property until a professional comes out to repair the window. This also serves as an obstruction to prevent intruders from getting into your home. If the distance between the door and the window is large, you might need to consider security screens that has a window. This will provide the best of both.
2. Sagging
uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. However, over time, they may be afflicted by a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It's important to take action when you discover that your uPVC windows are sliding.
To repair a window that is sagging, you can try repositioning the hinges. To do this, you'll need to open the window so that you can get to the frame. Then, remove both the top and bottom hinges using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you've relocated your hinges. If windows repairs near me are happy with the size of the window, tighten the screws to secure them in the right position.
If you aren't able to move the hinges you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to loosen. If this happens, it's essential to replace the seal as quickly as possible so that your uPVC windows are waterproof and secure from draughts.
uPVC handles may also become loose. This is often caused by screws that have loosened over time, but it could also be caused by the handle mechanism wears out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. First, you'll need to close your window and do an experiment to ensure that it fits. The corners of the sash need to be aligned with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle, and then return the mechanism to its original the position it was in.
3. Water Leaks
It is important to take action if you wake up every morning to find mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.
This is a fairly simple fix that can be completed by any DIY expert. Depending on the severity of the problem is, the old caulking may need to be removed. When it is time to uPVC repair, you should be careful not to over-caulk. This will make your window more difficult to clean and lower its energy efficiency.
It is important to check that the drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious cases you might need to consider replacing the window.
Mold spots and rotted sills are another sign of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the house.
If the leakage is occurring between the double-glazed glass, it is more likely that the problem is with the seal than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
Hinges could be the reason when your uPVC window is difficult to open, or if it opens with an ease. They can be repaired by any skilled DIYer and can usually be done within a few minutes.
Like all mechanical parts hinges are prone to be damaged over time. It's easy to change a window hinge, but it's easier if someone helps you hold the frame.
It is also important to ensure that the uPVC hinges are opening and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.
The issue can be caused by opening the window incorrectly or by a poor installation at the factory. Sending us a picture via our website is often enough to resolve the problem. We are more than happy to offer assistance.
It is also essential to grease the hinges regularly. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It also decreases the chance of windows getting stuck and stop corrosion. Ideally, you should perform this every year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.
5. Draughts
Draughts in windows made of upvc can be caused by a few different things. The hinges, also because of wear and tear, can become misaligned, this causes an opening to appear where the sash meets the frame. If they are damaged beyond repair, it might be necessary to get them re-aligned. The second is the interlock, which is located on the hinge side of the window, can also become misaligned, again it's feasible to give them a thorough clean, however in some instances it could be necessary to have these replaced.
The seals may wear out or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures and will reduce the possibility of draughts.
Lastly, one of the most effective methods to reduce the draughts in your home is to use a draught excluder. These are usually fabric tubes filled with some kind of filler. They can be placed on top of your windowsill. They will help keep cold air out and keep your home warm and cosy!
With a bit of regular maintenance and repair your windows made of upvc will continue to provide a great level of security and insulation for your home. However, it is important to recognize that all windows have a life span and there may come an point at which it is more economical to replace them than fix them. If you have any problems with your window made of upvc, it's best to consult a professional as soon as possible.