10 Myths Your Boss Has About Double Glazed Window Repair

Double Glazed Window Repair
Double glazing is an excellent investment in energy efficiency. It prevents loss of heat in the winter months and keeps your home cool during summer. Repairing your double-glazed windows when necessary is a great way to ensure they remain in good condition.
Over time, your double glazed windows may experience issues such as condensation and misting. This could cause your double glazed windows to be difficult to open or close.
Broken Panes
A rogue baseball, a flying pebble from your lawnmowers or even a storm that is heavy can shatter the double panes of your windows, leaving your home exposed to the elements. While a damaged glass window isn't easy to fix, it doesn't need to be replaced. In fact, the insulated glass between the two panes is still in good shape and you can fix your double-pane window with a little DIY effort.
First, you'll need to take any broken glass from the frame. Be careful to keep glass shards from falling to the floor or falling from the frame. Make sure you wear gloves to protect your hands and a rag to protect the area surrounding the broken glass to avoid further breakage or cuts. After removing the broken glass, clean the frame of the window thoroughly to remove any sealant or other debris. Sand rough areas of the frame to create a smooth and even surface to put in your new glass.
After cleaning the frame and dried, you can apply a fresh layer of glass to the place in which the broken pane was removed. This is the best method to keep your window safe and sealed and will save you money by keeping water and drafts from entering your home. Next, you will need to select your glazing material. There are several options available, including clear tape which is more durable than regular tape and will help keep your window secure from further cracking, and glazing film that resembles clear plastic wrap. This option has the advantage that it can be painted to match your frame, and will also block out the elements like ice and rain.
No matter what material you use it is important to press the glaziers points into the place where the putty joins your frame. They will help hold the new glass in place and aid it to adhere to the frame. Hardware stores sell glazier's ropes that you can roll out on the frame rabbets.
Condensation
Double glazing is susceptible to condensation issues. If you encounter this issue, it is recommended to contact the company that installed the window. Many companies provide warranties and guarantees that will cover the problems. Fogging or condensation between the windows' panes is a sign that your seals aren't working properly. Only a professional can resolve this problem by replacing both panes.
It is a tricky procedure that requires special tools to remove and replace the window. A professional can handle this task and provide the equipment. It is best to leave the job to a professional. These tools could be dangerous.
If you decide to undertake this yourself, be sure to wear gloves and safety glasses to protect yourself from broken pieces of glass that could fly off during the process. It is crucial to remove all metal or putty points from the grooves that will be receiving the new window. Wire-brushing the frame or vacuuming a damp cloth is also recommended. Once the frame is clean and dry, you will need to order a piece of replacement glass which is 1/8 inch less in each direction than your window, and then test it into the grooves.
Based on the frames you have depending on your frames, you'll need to apply a thin layer of silicone caulk to the grooves in order to ensure that the new pane is secure in position. After the silicone caulk is dried and cured, you can smooth it out and make any adjustments. The wood molding will then be put back in place.
If the weather suddenly changes, double-glazed windows may become difficult to open or close. Extreme temperatures can cause the frames of double-glazed windows to expand or shrink, causing them to sag and stick. If this is the case try wiping the frames down with water and lubricating the joints. However, it may be best to ask the company that installed your windows for help.
Misunderstood
If window repair is trapped between the glass panes, it can cause misted double glazing. Double glazing consists of two glass panes that are separated by an insulating space typically filled with argon gas to provide increased thermal efficiency. This results in an airtight seal that keeps warm indoor air inside, and cold outdoor air out.
This seal can become damaged over time and water can accumulate between the glass panes, causing them to become cloudy. This happens because the sun heats the gap between the panes of windows, causing water to vapourize.
This is a natural occurrence however if it occurs between the panes of the window it could be a problem because it won't be able to control the temperature within the room. Instead, the temperature outside the window will influence the temperature inside. If you notice your double-glazed windows have become misty, call in the experts at Northfield Glass to investigate.
We can replace a single blown sealed unit, without needing to replace the entire window. This is less disruptive than a full replacement. Our misty glass repair consists of removing and cleaning the glass and replacing it with a brand new one. This will result in a seal that is watertight again.
Some companies in the field claim to inject chemicals through holes drilled into misted windows to remove the fog and condensation. We don't recommend this method. This is not just unattractive, but it could also harm the toughened glass and leave you with windows that do not completely perform its function.
If you don't take care to fix the problem immediately it could cause mould, which can not only cause damage to the window, but also pose health risks to your loved ones. Moisture can also cause other problems in your home, like dampness or rot. In some cases, it may be necessary to replace the entire window.
Failed or Blown
Double-glazed windows are comprised of two glass panes with an air or inert between them. This increases their thermal efficiency, keeping the cold out and heat in. Over time the gas will be depressurized and cause many problems.
Condensation between panes is among the most common. Although it's a normal event, it doesn't necessarily mean that your window has failed but it could be an indication that you have to re-seal your windows. window repair could also be an indication of broken double glazing, which could need to be replaced.
You should also look out for draughts coming from your double-glazed windows. This could be due to the seal being damaged or a damaged handle lock. It is important to fix the issue as quickly as possible. A draft can cause you to spend more on heating. You can test the seals by placing your finger around the edges of your window frame to see whether you feel cold air.
There will also be water beads on the interior of windows if your window seals aren't performing as they should. This is a sign that you need to seal your double-glazed windows.
Your window frames are designed to move slightly and this is essential to keep the glass sheets in position. As time passes, this particular packaging material could become compressed. This will cause the seal to become broken. This will allow air to circulate between the panes and reduce the energy efficiency of your window.
A seal that is blown is a clear sign that your double glazing is damaged and must be fixed as soon as possible. A damaged seal will stop your double glazing from performing its primary job of keeping the cold out and warm inside. A blown seal can also let moisture into your home, which can result in mold and other unpleasant conditions. It is important to contact a double glazing repair expert immediately if you discover a blowing seal on your double-glazed windows, as they can replace the whole unit.