20 Resources To Help You Become More Efficient With Window Repair

Window Repairs
Window repairs can help homeowners save money while maintaining their comfort. Window replacement may be necessary in the event of severe damage like broken glass or a shattered window frame.
However, many other issues can be repaired to extend the life of your windows. Common problems include:
Broken or cracked panes
It's a rock that's been that was tossed by your lawnmowers or a tree branch blown by strong winds, cracked windows are not just visually unappealing, but also can result in higher electric bills since the broken pieces let cold air into your home. Luckily, it's typically simple to repair windows with broken panes.
Begin by carefully removing glass using gloves and sunglasses. You may need to use an utility knife to loosen old glazing compound or putty around the frame's edges. Then, use a gentle paper towel or cloth to clean the surface of both the glass and the wood of the frame.
Once the frame is clean, apply a waterproof silicone caulking around the frame's perimeter. This will prevent water from entering the frame through the cracks and result in further damage.
A bad crack in double-paned glass can affect the gas between the panes, which can make your windows less efficient in insulating. If the crack is so severe that it compromises the strength of the window or if the inner pane is missing, you may need to call an expert.
Thermal stress cracks can also occur when there's an extreme difference in temperatures between the outside and inside of your home, which causes the glass to expand or contract. If the cracks are located on two sides of a window it is recommended to replace it instead of attempt to repair it.
If your windows are cracked and not yet ready to be replaced clear tape can do a good job of preventing the crack from spreading and keeping out bugs and cold air. You can cut the length of a nylon stocking to completely cover the crack and glue it with duct tape. This isn't a permanent fix, but it will keep insects and cold air away from your home. If your windows are older and you're starting to notice cracks in the glass, it's recommended to consult with your local window manufacturer to determine if replacing the entire window might be a better solution for you.
Rotten Wood
Wood rot is a common problem with windows. It can alter the appearance of a house and can also be an hazard to safety. It is, however, possible to repair rotted wood. First, you need to ensure that the root of the rot has been taken care of. Check for roof leaks and other areas that water may get into the wood.
The next step is to get rid of any rotten areas of the window frame. This can be done with the claw hammer, chisel or a rasp. After removing the rotten wood, you'll need to replace it with new wood. It is recommended that you make use of pre-treated wood for this project since it is resistant to rot. If you cannot replace the damaged timber you can apply wood filler and hardener to repair the damaged area. Many hardware stores will sell this kind of product. Follow the directions on the label of the product to ensure the most efficient results.
After you have repaired the rotten areas of the windowsill, it's important to protect the repaired area. This can be done by applying a water-resistant wood sealant. Sikkens, for example is a great one to use.
You can also use an epoxy filler with two parts to shield the wood from further damage. It is easy to apply and leaves a beautiful finish. However, it is important that you adhere to the instructions for application on the label. Once the epoxy filler has dried, you can rub the wood's surface. It is recommended to begin with a rough grade of sandpaper, and then progress to a smoother one.
You don't want to expose the damaged part to further moisture. It is a good idea that's why you should protect the surface you have repaired with an oil-based prime which will shield it from moisture. After that, you are able to reapply the wood sealant, which is waterproof.
click now won't open
There are a variety of reasons windows won't open. Wood frames can warp in rainy weather, or the house could have settled or someone might have nailed it shut to protect themselves. With a little patience and the right tools, you can open the majority of stuck windows.
One of the most common reasons for windows that won't open is accumulated gunk or debris on its moving parts. Acme Glass notes that dirt and grime build up over time on the sliding tracks, hinges and locks. Metal hardware may also rust if it comes into contact with humidity and direct sunlight. Making sure these areas are lubricated with spray grease will help prevent the oxidation process and ensure that your window is working correctly.
Stuck windows may be the result of a loosening or breakage of the pulleys that are used to lift and lower the window. These parts can lose tension and become obstructed when they are situated two or more floors higher than the ground.
If you are having difficulty opening a door, try using a pry-bar to gently open the window. Put a piece of wood on the frame to give your pry bar more leverage. Also, be careful not to damage the window or the wood. Try running a hairdryer along the frame's edges for a few minutes. This will warm the wood and make it easier to move.
A broken spring could be the reason for windows that don't lift or lower. You'll need to check the owner's manual for additional details depending on the person who made your windows.
If you have tried cleaning the moving parts of your windows and lubricating them but they're still not opening it could be the right time to replace them with new, energy-efficient windows from Homespire Windows and Doors. Don't let your windows slip from functional to useless since a window that isn't properly closed can expose your home to burglary and water damage. Contact us today for more information about our replacement windows and services!