10 Quick Tips For Double Glazing Lock Repairs

Double Glazing Lock Repairs
Quality locks on your windows and doors will stop burglars from gaining entry into your home. They aren't likely breaking glass or trying to squeeze through open windows.
Some owners of double glazing, however, have encountered issues with their window or door lock following the installation. Fortunately, these issues are often fixable without having to pay for new double glazing.
Broken or faulty locks
If your uPVC window or door lock is damaged or defective, then a locksmith can fix it. They will be able to fix the striker plates, hinges and locks on your double glazing. They will also be able to reposition the cylinder to fix any misalignment problems which could cause your handle to not work correctly.
The mechanism may be locked when the key fits into the lock, but it will not turn or is difficult for you to insert. Grease or dirt can be trapped in the mechanism. If this is the case, it might be possible to clean the lock and lubricate it. It is important to use a dry lubricant, like graphite or teflon instead of oil, which attracts dirt and stick to the inside of the mechanism. After having lubricated, insert the lock key into the lock and turn it. The lubricant will work through the mechanism, and the lock should be able turn with ease.
Loose screws within the lock mechanism can be another reason for a broken lock. They can loosen, fall out, or even break completely preventing the lock to function properly. These screws can be tightened with a screwdriver, but you must be cautious not to tighten them too much. This could damage the internal components.
A damaged lock can be dangerous for your family and you. This is particularly relevant if you have young children. It can be easy for them to unlock the door without you knowing, and this can allow them access to your home. If you're worried about this happening, then a vetted locksmith can provide a quick and efficient service to secure your double-glazed doors.
Misty Glaze are a professional uPVC and double glazing business in Lancing that can fix all kinds of damaged and broken mechanisms handles, handles, cylinders, and lock systems on both uPVC windows and doors. We can also alter your uPVC or double glazing locking system to meet your specific requirements, which means that in many cases replacement doors and windows are not necessary.
double glazing repairs that are broken or are damaged
A lot of double-glazed windows come with a multi-point lock as part of the overall security package. This is a great choice for those worried about potential thieves who may try to gain entry to your home. It is also a good idea to ask your installer about anti-lift locks that can be installed on top of the locks already in place and ensure that your window is secured in its closed position.
Handle locks can be damaged or fail. They are the first part that criminals will utilize to force open your window. Luckily, the good news is that this is among the most straightforward parts to fix.
Modern uPVC and aluminium handles operate a multi-point locking system called Espagnolette that is designed to withstand forced entry. This upgrade to security is typically provided as an additional option on new uPVC window installation. As an upgrade option, older style handles made of aluminium or uPVC that are no longer used can be upgraded to shoot bolt locking systems.
When a handle is faulty it is essential to get the handle repaired as soon as is possible. The damaged handles could stop the window from closing properly and allow drafts to get in. It could be a weakness that burglars with a plethora of opportunities might exploit, putting your family and belongings at risk of theft.
To repair the damaged mechanism, first access the window frame and remove the damaged handle. The gearbox can then be accessed to determine the kind of gearbox used to open the handle. This will permit to replace the handle that matches the profile and internal window frame mechanisms.
Once the mechanism has been replaced, the handle can be re-attached using the original screws - however, we generally recommend replacing them with larger ones because this will ensure an even more secure fit. The final step is to seal the handle with an opaque sealant. This will shield it from further corrosion. Once you've completed this step the window should be functional again, and at a fraction the cost of replacing it.
Hinges that are Broken or damaged
If your windows don't close properly, you could experience draughts, an affliction of your home's security and a higher risk of water or damp damage. Broken or defective window hinges are a frequent issue that can be fixed easily.
If your uPVC windows don't close or open, it is likely that the hinges need to be repaired or replaced. A lot of window manufacturers will require you to buy an entirely new window unit in order to fix this simple issue, but we can replace the hinges in order to save you money.
Window hinges can be damaged through repeated use, or weakened over time by corrosion. In the event of a damaged hinge, it is important to take measures to prevent further damage by taking care not to push the window to close or open.
You can find the right parts for your hinge by identifying its model. The most commonly used types of window hinges are Maco, Mila, Roto and many other brands. It is recommended to speak with a professional in this case so that you don't make the mistake of purchasing parts that aren't compatible with your existing hardware and could cause further damage.
The hinges that are not working properly can cause major issue for your uPVC window and doors. They can be a major source of noise, and they can also allow water infiltration that can cause damage to your windows.
To resolve this issue, first make sure that the pin barrel on both hinge halves is aligned. If not tapping the headpin, use a hammer in order to create a slight bend in the hinge barrel. This will hold the pin in place. Then, ask a helper to hold the door as you take the hinge screws and hinges from both the doorjamb as well as the door. Replace the hinges and attach screws using glue. Finally put the hinges in place using clamps or weights while the glue dries.
After you have fixed the hinges, you can reinstall the door. You could also reattach the handle. It is recommended to replace the screws using the same length of dowels as the screw that was originally used so that they are in line with each one.
Glass that is broken or damaged
uPVC Windows can become damaged over time, despite the fact that they are extremely effective in keeping cold out and conserving the heat. This can include broken or damaged glass, as well as faulty locks. If not taken care of, it can turn into a major expense. It can also detract from the appearance of your home and may lead to a loss of insulation, so it is essential to fix any damage as soon as you can.
If your glass has cracked, but not broken it is possible to fix it yourself with the proper tools and methods. Be sure that the area around the glass that has been broken is free of debris to ensure that shards do not cause injury or trip hazards. Then, remove the broken glass pieces and dispose of them in the appropriate way. Then, put masking tape to the entire area to prevent pieces of glass from scattering and sticking to your skin when you move them. Pre-fitting the glass pane before applying glue is an ideal option in the case of a window that has two panes. This will ensure you have enough space to complete your project.
Before applying the glue wipe the surface of the broken frame and the glass with an unclean, dry cloth. Follow the instructions for application and curing time that can differ from product to product. Depending on the degree of the crack you may need to clamp the glass to hold it in place during the curing process with lightweight clamps that are specifically designed to support fragile materials.
After the adhesive has fully set, carefully place the glass inside the window frame, ensuring it's flush with the edge of the frame, and there are no gaps between the glass and the window sash. Be careful to avoid flexing the window when it's being put back in place, as this can weaken the seal and cause condensation and water infiltration.
If you have a glass window that's completely shattered or has larger cracks, consult a professional glazier like O'Brien(r) to arrange the replacement. It's essential to act swiftly if you have broken glass.